400 € – 405 €
[vc_row][vc_column width= »1/3″][vc_column_text]
Diameter 39mm
Thickness 11mm
Stainless steel 316L brushed
Screwed caseback, numbered
Filled with « non-silicone » FLUID, dielectric and with a higher density than water
39mm
Stainless steel 316L PVD black matt
Uni-directional
60 minutes graduation filled with white lacquer
Luminescent insert at 12h
Screwed crown
Stainless steel 316L
3mm thickness
Sapphire with anti-refractive layer inside[/vc_column_text][/vc_column][vc_column width= »1/3″][vc_column_text]
Ronda 715 Li
Quartz, 5 jewels
Lithium 3V battery, 7 years life
Swiss Made
Hours, minutes and central secondes
Date
EOL (End Of battery Life indication)
Second-stop for a precise time setting
Quick date set
Black matt with luminescent numbers and indices
Hours, minutes et secondes skeletonized, filled
with luminescent[/vc_column_text][/vc_column][vc_column width= »1/3″][vc_column_text]
1000m
Black NATO strap in Nylon Kaki or Black And Nylon Seat Belt Black or Grey.
20mm wide
Stainless steel buckle
Stainless steel spring bars with HORLOSCAPHE engraved[/vc_column_text][/vc_column][/vc_row]
TVA non applicable, article 293 B du code général des impôts
Partager :
FLUIDE version
Always faithful to its philosophy, Horloscaphe is inspired by scuba diving instruments for the FLUID version of the NC001 model.
Like manometers, diving compass and depth gauges filled with glycerin,
Horloscaphe applies this principle: encapsulate a non-silicone fluid, dielectric and with a higher density than water, for these numerous advantages:
– greatly increase its resistance to hydrostatic pressure,
– Lubricate the internal organs and prolong the life of the movement,
– Allow better readability because the internal fluid reduces glare,
Despite a slight fluid resistance on the hands, it does not affect the behavior of the time because the electronic circuit is set with a 0.2 second advance per day to balance the march.
The air bubble:
A bubble of + or – 5 mm is present in the fluid. Its role is to balance the internal pressure of the watch. It can be visible under the glass or invisible because hidden behind the dial its size varies according to its environment.
Temperature :
In cold, the fluid shrinks and the volume of the air bubble expands. Under the effect of heat, the volume of the fluid expands and compresses the retracting bubble.
Pressure:
Under high pressure (while diving), the bubble is compressed and its size decreases.
Conversely, in low pressure (high mountain) its size increases.
A matt black watchdial, 12-3-6-9 with luminescent hour markers to insure the best contrasts for an optimum readability.
A 39mm brushed 316L steel case, an unidirectional rotating bezel in matt black PVD steel make this diving watch the perfect « Tool Watch », water resistant to 1000m.
Warranty 2 years parts and labor, except violent shocks proved, fall, broken glass or crown.
VAT not applicable
Couleur du bracelet | Nylon Bleu, Nylon Gris, Nylon Orange, Nylon Sable, Nylon Rayé Bicolore Gris, Nylon jaune, Nylon Noir, Nylon Kaki, Nylon Seat belt Noir, Nylon Seat belt Gris |
---|
Il y a quelques points importants à garder à l’esprit lorsque vous retournez un produit que vous avez acheté. Vous pouvez renvoyer les articles non désirés par la poste contre signature dans un délai de 14 jours ouvrables à compter de la date de réception.
Vous disposez d’un délai de 14 jours calendaires pour retourner un article à compter de la date à laquelle vous l’avez reçu.
Uniquement les articles achetés directement dans notre magasin officiel.
Conditions de retour : intacte (pas de coups ni de rayures sur la montre, le bracelet ou le boîtier) jamais portée dans son emballage d’origine.
Votre montre sera livrée sous 2 jours pour la France et entre 5 et 6 jours pour le reste du monde, par colis avec suivi.
Sur la page du panier d’achat, vous pouvez calculer les frais d’expédition en fonction de votre pays.
INFORMATION IMPORTANTE : Les taxes d’importation ne sont pas incluses. Vous pouvez y être soumis en fonction de votre pays de livraison.